Shock Cover 1/10 Scale

Scuff Racing Shock Covers are designed for a tight fit on the shock body to keep them in place so they can protect the tracks carpet and your shocks as well. They are 3D printed using a flexible material so they can be flexed over to access the top shock nut for suspension tuning or shock removal.

To install the shock covers remove the lower shock mounting screw from the control arm, remove the spring and upper spring collar. Then slide the shock cover up the shock body and reassemble the shock. The 1/10 scale shock covers are available in 4 sizes to fit all the different manufacturers shocks.

"12mm Short" fit shocks with an internal diameter of 12mm that have a short shock cap. For example: TLR22 5.0, Associated B74.1 Yokomo YZ-2

"12mm Tall" fit shocks with an internal diameter of 12mm that have a tall shock cap.       For example: TLR22 4.0 and older 

"13mm Short" fit shocks with an internal diameter of 13mm that have a short shock cap. For example: Associated B74.2

"13mm Tall" fit shocks with an internal diameter of 13mm that have a tall shock cap.       For example: Tekno EB410 EB410.2